How to clean the inner wall of stainless steel capillary

1. If the cleanliness requirement is low, immerse the stainless steel capillary tube in the heated degreasing liquid, and then circulate and rinse it with air or water. It is better to scrub back and forth with a brush of suitable size. In short, it is necessary to heat and use a degreasing liquid or cleaning liquid that is very effective in dissolving and dispersing the grease attached to the inner wall.
2. If the cleanliness requirement is high, use ultrasonic cleaning. The principle of ultrasonic cleaning is that when ultrasonic waves propagate in liquid, the sound pressure changes sharply, resulting in a strong air phenomenon in the liquid, and millions of tiny cavitation bubbles are generated every second. These bubbles are rapidly generated in large quantities under the action of sound pressure. They will not explode violently, but will produce strong impact force and negative pressure suction, which is enough to quickly peel off stubborn dirt.
3. If the stainless steel capillary is relatively long and has its own water tank, you can buy an ultrasonic vibration plate and put it in the water for ultrasonic cleaning. If the time is not long, you can insert the ultrasonic vibrator into the pipe for cleaning, and then use tap water to rinse off the dirt stripped by the ultrasonic wave.
The above is an introduction to the cleaning method of stainless steel capillary. I hope it can be helpful to everyone. If you have business needs related to stainless steel capillary and stainless steel capillary welded pipe, you can contact us for felice.weite1999@gmail.com, and we will reply to you in time.